Air Filters

By: Microclene Australia

MC100

The MC100 copes well with an average small workshop (10-12 cubic meters). Small, portable & very economical to run, this filter is an invaluable health & safety product for the hobbyist.

The MC100 can be stood on the bench close to the workpiece or wall mounted with the optional MCC100 cradle. It’s designed to act as either a general workshop air cleaner or work directly over a machine (ideal over a lathe).

Also great for the home decorator. If you’re sanding skirting boards or door frames etc, take the MC100 indoors and stop the dust from going all over the house.

Technical Details

Dimensions 205mm diameter, 250 mm length. (not including foot)
Single Speed 25 watt motor
Flash and spark protected motor
Dust ingress protected to IP44 standard
Fire resistant polyvee glass filters
Great for Mobile Users
Filters 10+ m³ on average of x10/hr
Filters particles down to a mean size of 0.4µm

MC1000

At the heart of the MC 1000 is Microclene's powerful, fully balanced centrifugal motor that strips fine contaminants from the air at 1000 cubic metres per hour. Perfect for a lower ceiling or for positioning directly above the source of your dust.

Hang from the ceiling near the centre of the room by purchasing the additional fixing bracket from our store or use two hooks 5cm apart.

With its filter area located at the base, the MC1000 is ideally suited to the woodturner. The compact size makes it easy to move where you need it most, where you are working.

This high flow rate is in a unit of 30cm diameter and just 22.5cm high.

Technical Details

Dimensions 228mm (H) x 308 (D)
Single Speed 100 watt motor
Dust ingress protected to IP44 standard
Suspends from the ceiling (chains supplied)
Fire resistant polyvee glass filters
Compact and Portable Design
Filters 100 m³ on average of x10/hr
Filters particles down to a mean size of 0.4µm

MC3000

More Poweful, quieter and nearly half the size of the MC 2800. It filters 300+ m³ on its own, several machines can be used in larger areas.

Powder coated on the outside and galvanised on all internal metalwork for a long life. There are 4 x 100 watt motors and 4 individual filters, the air is filtered through EU4 grade filters on 4 sides and clean air is vented through the top.

It has 4 brackets on the top for hanging the machine from the ceiling or other suitable points, steel cables with shackles should be used for this.

Technical Details